HP PROCURVE 2910AL User Manual

Configuring Secure Shell (SSH)
Messages Related to SSH Operation
Messages Related to SSH Operation
Message Meaning
00000K Peer unreachable. File transfer did not occur. Indicates an error in
communicating with the tftp server or not finding the file to
download. Causes include such factors as:
• Incorrect IP configuration on the switch
• Incorrect IP address in the command
• Case (upper/lower) error in the filename used in the
command
• Incorrect configuration on the TFTP server
• The file is not in the expected location.
• Network misconfiguration
• No cable connection to the network
00000K Transport error. File transfer did not occur. Indicates the switch experienced
a problem when trying to copy tftp the requested file. The
file may not be in the expected directory, the filename may
be misspelled in the command, or the file permissions may
be wrong.
Cannot bind reserved TCP port
<port-number>.
Client public key file corrupt or not
found. Use 'copy tftp pub-key-file <ip-
addr> <filename>' to download new file.
The ip ssh port command has attempted to configure a
reserved TCP port. Use the default or select another port
number. See “Note on Port Number” on page 7-18.
The client key does not exist in the switch. Use copy
tftp to download the key from a TFTP server.
Download failed: overlength key in key
file.
Download failed: too many keys in key
file.
Download failed: one or more keys is not
a valid public key.
The public key file you are trying to download has one of the
following problems:
• A key in the file is too long. The maximum key length is
3072 characters, including spaces. This could also mean
that two or more keys are merged together instead of
being separated by a <CR><LF>.
• There are more than ten public keys in the key file and
switch total. Delete some keys from the switch or file.
The switch does not detect duplicate keys.
• One or more keys in the file is corrupted or is not a valid
public key.
Refer to “To Create a Client-Public-Key Text File” on page
7-25 for information on client-public-key properties.
Error: Requested keyfile does not exist.
The client key does not exist in the switch. Use copy
tftp to download the key from a TFTP server.
7-29

HP PROCURVE 2910AL Specifications

General

Brand	HP
Model	PROCURVE 2910AL
Category	Switch
Language	English