HP PROCURVE 2910AL User Manual

Configuring and Monitoring Port Security
Port Security
Port Security Command Options and Operation
Port Security Commands Used in This Section
show port-security 13-9
show mac-address
port-security 13-12
< port-list > 13-12
learn-mode 13-12
address-limit 13-15
mac-address 13-16
action 13-16
clear-intrusion-flag 13-17
no port-security 13-17
This section describes the CLI port security command and how the switch
acquires and maintains authorized addresses.
Note Use the global configuration level to execute port-security configuration
commands.
Port Security Display Options
You can use the CLI to display the current port-security settings and to list the
currently authorized MAC addresses the switch detects on one or more ports.
13-8

HP PROCURVE 2910AL Specifications

General

Model	HP ProCurve 2910al
Switching Capacity	128 Gbps
Throughput	95.2 Mpps
Management	Web, CLI, SNMP
Jumbo Frame Support	Yes
Manageable	Yes
Power	100-240 VAC
Power Supply	Internal
Operating Temperature	0°C to 45°C (32°F to 113°F)
Stacking	Yes
MAC Address Table Size	32000 entries
Routing Protocol	RIP, OSPF
Features	IPv6, VLAN, QoS, ACLs
Operating Humidity	15% to 95% non-condensing
Uplink Ports	4
Power over Ethernet	Yes (PoE+ models available)