HP PROCURVE 2910AL

Configuring Port-Based and User-Based Access Control (802.1X)
Displaying 802.1X Configuration, Statistics, and Counters
Syntax: show port-access authenticator clients <port-list> detailed
Displays detailed information on the status of 802.1X-
authenticated client sessions on specified ports.
ProCurve (config)# show port-access authenticator clients 5 detailed
Port Access Authenticator Client Status Detailed
Client Base Details :
Port : 5
Session Status : Open Session Time(sec) : 999999999
Frames In : 999999999 Frames Out : 99999999
Username : webuser1 MAC Address : 001321-eb8063
IP : 2001:fecd:ba23:cd1f:dcb1:1010:9234:4088
Access Policy Details :
COS Map : 70000000 In Limit % : 87
Untagged VLAN : 3096 Out Limit % : 100
Tagged VLANs : 1, 3, 5, 6, 334, 2066
RADIUS-ACL List :
deny in udp from any to 10.2.8.233 CNT
Hit Count: 0
permit in udp from any to 10.2.8.233 CNT
Hit Count: 0
deny in tcp from any to 10.2.8.233 CNT
Hit Count: 0
permit in tcp from any to 10.2.8.233 CNT
Hit Count: 0
permit in tcp from any to 0.0.0.0/0 CNT
Hit Count: 0
Figure 12-16. Example of show port-access authenticator clients detailed Command Output
12-61