To Next Page

To Previous Page

Configuring Username and Password Security

Front-Panel Security

Password Recovery: Shows whether the switch is configured

with the ability to recover a lost password. (Refer to

“Password Recovery Process” on page 2-34.) (Default:

Enabled.)

CAUTION: Disabling this option removes the ability to

recover a password on the switch. Disabling this option is

an extreme measure and is not recommended unless you

have the most urgent need for high security. If you disable

password-recovery and then lose the password, you will

have to use the Reset and Clear buttons (page 2-25) to reset

the switch to its factory-default configuration and create a

new password.

For example, show front-panel-security produces the following output when

the switch is configured with the default front-panel security settings.

Figure 2-9. The Default Front-Panel Security Settings

2-28

Other manuals for HP PROCURVE 2910AL

Questions and Answers:

Need help?

Do you have a question about the HP PROCURVE 2910AL and is the answer not in the manual?

General