HP ProCurve 5400zl

Next Available Option:
■ cv_flash < primary | secondary > -- Copy to primary/secondary flash.(p. 107)
■ copy tftp pub-key-file IP-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Options:
■ append -- Add the key(s) for operator access.(p. 102)
■ operator -- Replace the key(s) for operator access (default); follow with the 'append' option to
add the key(s).(p. 119)
■ manager -- Replace the key(s) for manager access; follow with the 'append' option to add the
key(s).(p. 117)
■ copy tftp pub-key-file IPV6-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Options:
■ append -- Add the key(s) for operator access.(p. 102)
■ operator -- Replace the key(s) for operator access (default); follow with the 'append' option to
add the key(s).(p. 119)
■ manager -- Replace the key(s) for manager access; follow with the 'append' option to add the
key(s).(p. 117)
■ copy tftp startup-config IP-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy tftp startup-config IPV6-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy tftp config CONFIG IP-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy tftp config CONFIG IPV6-ADDR FILENAME
110© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide