HP ProCurve 5400zl User Manual

■ dhcp-relay option 82 keep mgmt-vlan
Sets the remote id to be the IP address of the Management VLAN.
■ dhcp-relay option 82 drop mgmt-vlan
Sets the remote id to be the IP address of the Management VLAN.
■ dhcp-relay option 82 validate append mgmt-vlan
Sets the remote id to be the IP address of the Management VLAN.
■ dhcp-relay option 82 validate replace mgmt-vlan
Sets the remote id to be the IP address of the Management VLAN.
■ dhcp-relay option 82 validate drop mgmt-vlan
Sets the remote id to be the IP address of the Management VLAN.
option
■ [no] dhcp-relay option
Optional argument to dhcp-agent used to specify operational status for
DHCP options.
Next Available Option:
■ 82 -- Optional argument to dhcp-agent used to specify the operational status for option 82.(p.
161)
replace
■ dhcp-relay option 82 replace
Species that any existing option 82 elds will be replaced with
switch option 82 eld for client DHCP packet.
Next Available Options:
■ validate -- Specifies the validation for server response.(p. 165)
■ mac -- Sets the remote id to be the MAC address of the switch. This is the default value.(p. 163)
■ ip -- Sets the remote id to be the IP address of the VLAN on which the client request was
received.(p. 162)
■ mgmt-vlan -- Sets the remote id to be the IP address of the Management VLAN.(p. 163)
■ dhcp-relay option 82 validate replace
Species that any existing option 82 elds will be replaced with
switch option 82 eld for client DHCP packet.
Next Available Options:
■ mac -- Sets the remote id to be the MAC address of the switch. This is the default value.(p. 163)
■ ip -- Sets the remote id to be the IP address of the VLAN on which the client request was
received.(p. 162)
■ mgmt-vlan -- Sets the remote id to be the IP address of the Management VLAN.(p. 163)
164© 2009 Hewlett-Packard Development Company, L.P.
dhcp-relayCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English