HP ProCurve 5400zl User Manual

■ mgmt-vlan -- Sets the remote id to be the IP address of the Management VLAN.(p. 163)
■ dhcp-relay option 82 validate drop
Species that the DHCP packet will be dropped unconditionally, if
option 82 eld(s) already exists in the client DHCP packet.
Next Available Options:
■ mac -- Sets the remote id to be the MAC address of the switch. This is the default value.(p. 163)
■ ip -- Sets the remote id to be the IP address of the VLAN on which the client request was
received.(p. 162)
■ mgmt-vlan -- Sets the remote id to be the IP address of the Management VLAN.(p. 163)
hop-count-increment
■ [no] dhcp-relay hop-count-increment
Optional argument to dhcp-agent used to enable/disable increment of
DHCP hop-count eld.
ip
■ dhcp-relay option 82 append ip
Sets the remote id to be the IP address of the VLAN on which the client
request was received.
■ dhcp-relay option 82 replace ip
Sets the remote id to be the IP address of the VLAN on which the client
request was received.
■ dhcp-relay option 82 keep ip
Sets the remote id to be the IP address of the VLAN on which the client
request was received.
■ dhcp-relay option 82 drop ip
Sets the remote id to be the IP address of the VLAN on which the client
request was received.
■ dhcp-relay option 82 validate append ip
Sets the remote id to be the IP address of the VLAN on which the client
request was received.
■ dhcp-relay option 82 validate replace ip
Sets the remote id to be the IP address of the VLAN on which the client
request was received.
■ dhcp-relay option 82 validate drop ip
Sets the remote id to be the IP address of the VLAN on which the client
request was received.
162© 2009 Hewlett-Packard Development Company, L.P.
dhcp-relayCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English