To Next Page

To Previous Page

■ [no] dhcp-relay option 82

Optional argument to dhcp-agent used to specify the operational status

for option 82.

Next Available Options:

■ append -- Specifies that the option 82 field should be appended to client DHCP packet.(p. 161)

■ replace -- Specifies that any existing option 82 fields will be replaced with switch option 82

field for client DHCP packet.(p. 164)

■ keep -- Specifies that no option 82 field will be added or replaced, if option 82 field(s) already

exists in the client DHCP packet.(p. 163)

■ drop -- Specifies that the DHCP packet will be dropped unconditionally, if option 82 field(s)

already exists in the client DHCP packet.(p. 161)

■ validate -- Specifies the validation for server response.(p. 165)

append

■ dhcp-relay option 82 append

Species that the option 82 eld should be appended to client DHCP

packet.

Next Available Options:

■ validate -- Specifies the validation for server response.(p. 165)

■ mac -- Sets the remote id to be the MAC address of the switch. This is the default value.(p. 163)

■ ip -- Sets the remote id to be the IP address of the VLAN on which the client request was

received.(p. 162)

■ mgmt-vlan -- Sets the remote id to be the IP address of the Management VLAN.(p. 163)

■ dhcp-relay option 82 validate append

Species that the option 82 eld should be appended to client DHCP

packet.

Next Available Options:

■ mac -- Sets the remote id to be the MAC address of the switch. This is the default value.(p. 163)

■ ip -- Sets the remote id to be the IP address of the VLAN on which the client request was

received.(p. 162)

■ mgmt-vlan -- Sets the remote id to be the IP address of the Management VLAN.(p. 163)

drop

■ dhcp-relay option 82 drop

Species that the DHCP packet will be dropped unconditionally, if

option 82 eld(s) already exists in the client DHCP packet.

Next Available Options:

■ validate -- Specifies the validation for server response.(p. 165)

■ mac -- Sets the remote id to be the MAC address of the switch. This is the default value.(p. 163)

■ ip -- Sets the remote id to be the IP address of the VLAN on which the client request was

received.(p. 162)

dhcp-relayCommand Line Interface Reference Guide

HP ProCurve 5400zl User Manual

Other manuals for HP ProCurve 5400zl