HP ProCurve 5400zl

Automatic address conguration.
■ [no] interface svlan VLAN-ID ipv6 address autoconfig
Automatic address conguration.
backbone
■ interface loopback < 0 to 7 > ip ospf IP-ADDR area backbone
The backbone area (the same as 0.0.0.0).
■ interface loopback < 0 to 7 > ip ospf all area backbone
The backbone area (the same as 0.0.0.0).
■ interface vlan VLAN-ID ip ospf area backbone
The backbone area (the same as 0.0.0.0).
■ interface vlan VLAN-ID ip ospf IP-ADDR area backbone
The backbone area (the same as 0.0.0.0).
■ interface vlan VLAN-ID ip ospf all area backbone
The backbone area (the same as 0.0.0.0).
backup
■ interface vlan VLAN-ID vrrp vrid < 1 to 255 > backup
Usage: vrrp vrid <VRID> backup
Description: Designate the virtual router instance as a Backup.
There is no default value.
bandwidth-min
■ interface [ETHERNET] PORT-LIST bandwidth-min
Usage: bandwidth-min output <0-100> <0-100> <0-100> <0-100>
<0-100> <0-100> <0-100> <0-100>
no bandwidth-min output
Description: Enable/disable and congure guaranteed minimum bandwidth
settings for outgoing trafc on the port(s). By default,
guaranteed minimum bandwidth is congured with a recommended
prole for outgoing trafc that prevents higher-priority
queues from starving lower-priority trafc.
When the feature is enabled, the value for each of the
queues indicates the minimum percentage of port throughput that
will be guaranteed for that queue. If a given queue does not
require its guaranteed minimum in a given service window, any
extra bandwidth is allocated to the other queues, beginning
with the highest-priority queue.
The actual number of queues could be 2, 4 or 8, depending on
system default and command 'qos queue-cong N-queues'.
The sum of all congured queue values must not exceed 100%.
Per-queue values must be specied starting with queue one
being the lowest priority and queue eight being the highest
226© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide