HP ProCurve 5400zl

Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
■ interface vlan VLAN-ID ip ospf IP-ADDR dead-interval < 1 to 65535 >
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
■ interface vlan VLAN-ID ip ospf all dead-interval < 1 to 65535 >
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
dhcp
■ [no] interface vlan VLAN-ID ipv6 address dhcp
Congure a DHCPv6 client.
Next Available Option:
■ full -- Obtain IPv6 address & Configuration information from DHCPv6 server.(p. 235)
■ [no] interface svlan VLAN-ID ipv6 address dhcp
Congure a DHCPv6 client.
Next Available Option:
■ full -- Obtain IPv6 address & Configuration information from DHCPv6 server.(p. 235)
dhcp-bootp
■ interface vlan VLAN-ID ip address dhcp-bootp
Congure the interface to use DHCP/Bootp server to acquire parameters.
■ interface svlan VLAN-ID ip address dhcp-bootp
Congure the interface to use DHCP/Bootp server to acquire parameters.
dhcp-snooping
■ interface [ETHERNET] PORT-LIST dhcp-snooping
Usage: [no] dhcp-snooping trust
Description: Congure the port as trusted or untrusted. Only DHCP server
packets received on trusted interfaces will be forwarded.
By specifying 'no' the port will be congured as untrusted.
The default state is untrusted.
Next Available Option:
■ trust -- Configure trusted interfaces(p. 279)
■ [no] interface vlan VLAN-ID dhcp-snooping
■ [no] interface svlan VLAN-ID dhcp-snooping
230© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide