Usage: vlan < vid > ipv6 mld forward < port-list >
Description: Instruct the device to forward incoming multicast packets
received on the speciîš¿ed ports. This feature is
conîš¿gured on a per-VLAN basis.
forward-protocol
â– interface vlan VLAN-ID ip forward-protocol
Usage: [no] ip forward-protocol udp IP-ADDR PORT-NUM|PORT-NAME
Description: Add or remove a UDP server address for the VLAN. The
broadcast packets received by the switch on this VLAN are to
be forwarded to the speciîš¿ed application server.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
Next Available Option:
â– udp -- Add or remove a UDP server address for the VLAN(p. 280)
full
â– [no] interface vlan VLAN-ID ipv6 address dhcp full
Obtain IPv6 address & Conîš¿guration information from DHCPv6 server.
Next Available Option:
â– rapid-commit -- Obtain IPv6 address quickly from DHCPv6 server.(p. 271)
â– [no] interface svlan VLAN-ID ipv6 address dhcp full
Obtain IPv6 address & Conîš¿guration information from DHCPv6 server.
Next Available Option:
â– rapid-commit -- Obtain IPv6 address quickly from DHCPv6 server.(p. 271)
graft-retry-interval
â– interface vlan VLAN-ID ip pim-dense graft-retry-interval < 1 to 10 >
Usage: ip pim-dense graft-retry-interval <1-10>
Description: Set the interval a PIM router waits for a Graft Ack before
resending a Graft on this interface. Default value is 3
seconds.
Range: < 1 to 10 >
gvrp
â– interface [ETHERNET] PORT-LIST gvrp
Usage: gvrp [join-timer <n>][leave-timer <n>][leaveall-timer <n>]
Description: Set the GVRP timers on the port (hundredths of a second).
235© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide
To Next Page
Loading...
Need help?
General