HP ProCurve 5400zl

Range: < 0 to 100 >
Next Available Option:
■ queue6 < 0 to 100 > -- Specify min. bandwidth percentage for queue six outgoing traffic.(p. 271)
queue6
■ interface [ETHERNET] PORT-LIST bandwidth-min output < 0 to 100 > < 0 to 100 > < 0 to 100 >
< 0 to 100 > < 0 to 100 > < 0 to 100 >
Specify min. bandwidth percentage for queue six outgoing trafc.
Range: < 0 to 100 >
Next Available Option:
■ queue7 < 0 to 100 > -- Specify min. bandwidth percentage for queue seven outgoing traffic.(p.
271)
queue7
■ interface [ETHERNET] PORT-LIST bandwidth-min output < 0 to 100 > < 0 to 100 > < 0 to 100 >
< 0 to 100 > < 0 to 100 > < 0 to 100 > < 0 to 100 >
Specify min. bandwidth percentage for queue seven outgoing trafc.
Range: < 0 to 100 >
Next Available Option:
■ queue8 < 0 to 100 > -- Specify min. bandwidth percentage for queue eight outgoing traffic.(p.
271)
queue8
■ interface [ETHERNET] PORT-LIST bandwidth-min output < 0 to 100 > < 0 to 100 > < 0 to 100 >
< 0 to 100 > < 0 to 100 > < 0 to 100 > < 0 to 100 > < 0 to 100 >
Specify min. bandwidth percentage for queue eight outgoing trafc.
Range: < 0 to 100 >
rapid-commit
■ [no] interface vlan VLAN-ID ipv6 address dhcp full rapid-commit
Obtain IPv6 address quickly from DHCPv6 server.
■ [no] interface svlan VLAN-ID ipv6 address dhcp full rapid-commit
Obtain IPv6 address quickly from DHCPv6 server.
rate-limit
■ interface [ETHERNET] PORT-LIST rate-limit
Usage: rate-limit icmp <percent <0-100> | kbps <0-10000000>>
rate-limit all <in|out> <percent <0-100> | kbps <0-10000000>>
271© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide