destination number.
o ACL-NAME - Standard or Extended Access Control List number.
o <in|out|both> direction of the trafîš¿c to be monitored.
Next Available Option:
â– all < In | Out | Both > -- Monitor all traffic.(p. 219)
monitor_mirror_session_id
â– [no] interface [ETHERNET] PORT-LIST monitor all < In | Out | Both > mirror < 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
Next Available Option:
â– no-tag-added -- Don't add VLAN tag for this untagged-port(p. 256)
â– [no] interface vlan VLAN-ID monitor all < In | Out | Both > mirror < 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
â– [no] interface svlan VLAN-ID monitor all < In | Out | Both > mirror < 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
mroute
â– interface vlan VLAN-ID ip mroute
Usage: ip mroute ...
Description: Conîš¿gure IP Multicast Routing parameters on the VLAN
interface. The command must be followed by a parameter.
Use 'ip mroute ?' to get a list of all possible parameters.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
Next Available Option:
â– ttl-threshold < 0 to 255 > -- Set the multicast datagram TTL threshold for the interface(p. 279)
name
â– [no] interface [ETHERNET] PORT-LIST name
Usage: name PORT-NAME-STR
no name
Description: Set/unset a name for the port(s).
This is an Interface context command. It can be called directly
from the interface context or follow the 'interface [ethernet]
PORT-LIST' command.
254© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide
To Next Page
Loading...
Need help?
General