HP ProCurve 5400zl

■ 0
■ 1
■ 2
■ 3
■ 4
■ 5
■ 6
■ 7
■ interface vlan VLAN-ID vrrp vrid < 1 to 255 > priority < 1 to 255 >
Usage: vrrp vrid <VRID> priority <1-255>
Description: Congure priority for the virtual router instance.
The default value is '100'.
Range: < 1 to 255 >
■ interface svlan VLAN-ID qos priority < 0 | 1 | 2 | ... >
Specify priority to use.
Supported Values:
■ 0
■ 1
■ 2
■ 3
■ 4
■ 5
■ 6
■ 7
propagation-delay
■ interface vlan VLAN-ID ip pim-dense propagation-delay < 250 to 2000 >
Usage: ip pim-dense propagation-delay <250-2000>
Description: Set the value inserted into the LAN Prune Delay eld of a
LAN Prune Delay option on this interface. Default is 500
milliseconds.
Range: < 250 to 2000 >
■ interface vlan VLAN-ID ip pim-sparse propagation-delay < 250 to 2000 >
Usage: ip pim-sparse propagation-delay <250-2000>
Description: Set the value inserted into the LAN Prune Delay eld of a
LAN Prune Delay option on this interface. Default is 500
milliseconds.
Range: < 250 to 2000 >
protocol
■ interface vlan VLAN-ID protocol
Set a predened protocol for the current VLAN.
Next Available Options:
■ protocols < IPX | IPv4 | IPv6 | ... > -- Set a predefined protocol for the current VLAN. (p. 267)
266© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide