EasyManuals Logo

HP ProCurve 5400zl User Manual

HP ProCurve 5400zl
765 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #270 background imageLoading...
Page #270 background image
proxy-arp
â–  [no] interface vlan VLAN-ID ip proxy-arp
Usage: [no] ip proxy-arp
Description: Enable/disable proxy ARP. This is a VLAN context command.
It can be called directly from the VLAN context or may follow
the 'vlan VLAN-ID' command prex. When proxy ARP is enabled on
a VLAN, the device responds to ARP requests received on the
VLAN ports when the device knows a route to the requested IP
addresses.
qinq
â–  interface [ETHERNET] PORT-LIST qinq
Usage: qinq port-type <cn-customer-network-port|pn-provider-network-port>
Description: Congure a port's type as customer-network or provider-network.
In svlan mode, the default port type is 'provider-network'. In
mixedvlan mode, default for SVLAN ports is 'provider-network'.
Conguring a port as either customer-network or provider-network
is applicable only if the device is congured in either svlan or
mixedvlan mode.
Next Available Option:
â–  port-type -- Configure qinq port-type(p. 263)
qos
â–  [no] interface [ETHERNET] PORT-LIST qos
Usage: [no] qos [dscp <0..63|af11|af12|af13|af21|af22|af23|af31|af32|
af33|af41|af42|af43|ef|cs0..cs7|000000|000001..111111> |
priority <0-7>]
Description: Set port-based priority. The 'dscp' or 'priority' must be
specied if 'no' is not used. Using 'no' congures the device
not to apply a source-port priority to this port's packets.
This is an Interface context command. It can be called directly
from the interface context or follow the 'interface [ethernet]
PORT-LIST' command.
Next Available Options:
â–  dscp -- Specify DSCP policy to use. (p. 231)
â–  priority < 0 | 1 | 2 | ... > -- Specify priority to use. (p. 265)
â–  [no] interface vlan VLAN-ID qos
Usage: [no] qos [dscp <0|1...63|af11|af12|af13|af21|af22|af23|af31|af32|
af33|af41|af42|af43|ef|cs0..cs7|000000|000001...111111> |
priority <0-7>]
Description: Set VLAN-based priority. The 'dscp' or 'priority' must
be specied if 'no' is not used. Using 'no' congures
the switch not to apply a VLAN priority override to this
VLAN's packets.
268© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide

Table of Contents

Other manuals for HP ProCurve 5400zl

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProCurve 5400zl and is the answer not in the manual?

HP ProCurve 5400zl Specifications

General IconGeneral
BrandHP
ModelProCurve 5400zl
CategorySwitch
LanguageEnglish

Related product manuals