HP ProCurve 5400zl

access
■ ipv6 authorized-managers IPV6-ADDR access < Manager | Operator >
Dene an access level desired.
Supported Values:
■ Manager
■ Operator
access-list
■ [no] ipv6 access-list
Usage: [no] ipv6 access-list <ACL-ID>
<resequence> <ACL-ID> <start-seq-no> <increment>
Description: Enter the ipv6 acl context for the specied access control
list.
Parameters:
o <ACL-ID>
Enter the ipv6 acl context for the specied access control
list. The ACL-ID is case sensitive and may be up to sixty-four
characters in length. If it includes spaces, the entire ACL-ID
must be enclosed in quotation marks.
o <resequence> <ACL-ID> <start-seq-no> <increment>
Renumber the entries in an Access Control List.
Start sequence number and increment can range between
1 - 2147483647.
Next Available Options:
■ acl-name -- Specify name of Access Control List to configure. (ASCII-STR) (p. 314)
■ resequence -- Renumber the entries in an Access Control List. (ASCII-STR) (p. 317)
access-method
■ [no] ipv6 authorized-managers IPV6-ADDR access-method < all | ssh | telnet | ... >
Dene an access method desired.
Supported Values:
■ all
■ ssh
■ telnet
■ web
■ snmp
■ tftp
acl-name
■ [no] ipv6 access-list ACL-NAME
Specify name of Access Control List to congure.
authorized-managers
■ [no] ipv6 authorized-managers
Usage: [no] ipv6 authorized-managers <IPV6-ADDR> [IPV6-MASK]
[access <manager|operator>]
314© 2009 Hewlett-Packard Development Company, L.P.
ipv6Command Line Interface Reference Guide