HP ProCurve 5400zl User Manual

loop-protect
OVERVIEW
Category:
configPrimary context:
Related Commands
Usage: [no] loop-protect <...>
[[ethernet] PORT-LIST [receiver-action <send-disable|no-disable>]|
[transmit-interval <1-10>]|
[disable-period <0-604800>]|
[trap <loop-detected>]
Description: Congure Loop protection on the switch.
Parameters:
o ethernet PORT-LIST - Port(s) to congure loop protection on. By default
loop protection is disabled on a port
o receiver-action - Sets the loop detected action per port. When a loop
is detected the port that received the loop protection
packet determines the action taken. If send-disable
is selected the port that transmitted the packet will
be disabled. If no-disable is selected, the port will
not be disabled. The default action is 'send-disable'.
o trap <loop-detected> - Congure Loop protection traps. The following
traps are generated by Loop protection
- 'loop-detected' signies that a loop was detected
on a port.
o disable-timer <0-604800> (default:0) - Sets the time in seconds to
disable a port for when a loop has been detected. A
value of 0 disables the auto reenable functionality.
By default the timer is disabled.
o transmit-interval <1-10> (default:5) - Time in seconds between transmission
of loop protection packets.
COMMAND STRUCTURE
■ loop-protect disable-timer < 0 to 604800 > -- Set time in seconds to wait before attempting to
reenable a port. (NUMBER) (p. 371)
■ [no] loop-protect port-list -- Specify the ports that are to be added to/removed from loop protection.
([ethernet] PORT-LIST) (p. 371)
■ receiver-action < send-disable | no-disable > -- Select action to take when loop protect packets
are received on the specified port(s). (p. 371)
■ loop-protect transmit-interval < 1 to 10 > -- Set time between packet transmissions. (NUMBER)
(p. 371)
■ [no] loop-protect trap -- Specify loop protection traps that are to be enabled/disabled. (p. 371)
■ loop-detected -- generate trap when a loop is detected (p. 371)
COMMAND DETAILS
transmit-interval (p. 371)port-list (p. 371)disable-timer (p. 371)
trap (p. 371)receiver-action (p. 371)loop-detected (p. 371)
370© 2009 Hewlett-Packard Development Company, L.P.

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English