mac-age-time
OVERVIEW
Device DiscoveryCategory:
configPrimary context:
Related Commands
Usage: mac-age-time <60-999960>
Description: Set the MAC address table's age-out interval.
A MAC address that is dynamically learned by the switch, stays
in the switch's address table for a certain amount of time -
the age-out interval, before being aged out. An address is aged
out if the switch does not receive trafc from that MAC
address for the age-out interval. The interval is measured in
seconds. The default value is 300 seconds.
COMMAND STRUCTURE
EXAMPLES
Example: mac-age-time SECONDS
Configure the MAC age-out interval to seven minutes:
ProCurve(cong)# mac-age-time 420
372© 2009 Hewlett-Packard Development Company, L.P.
To Next Page
Loading...
