HP ProCurve 5400zl

Set number of times a client can enter their credentials before authentication is
considered to have failed (default 3).
Range: < 1 to 10 >
max-start
■ aaa port-access supplicant [ETHERNET] PORT-LIST max-start < 1 to 10 >
Dene the maximum number of attempts taken to start authentication
(default 3).
Range: < 1 to 10 >
method
■ aaa accounting commands < stop-only > < radius >
Specify which accounting method to use (radius)
Supported Values:
■ radius -- Use RADIUS protocol as accounting method.
■ aaa accounting exec < start-stop | stop-only > < radius >
Specify which accounting method to use (radius)
Supported Values:
■ radius -- Use RADIUS protocol as accounting method.
■ aaa accounting network < start-stop | stop-only > < radius >
Specify which accounting method to use (radius)
Supported Values:
■ radius -- Use RADIUS protocol as accounting method.
■ aaa accounting system < start-stop | stop-only > < radius >
Specify which accounting method to use (radius)
Supported Values:
■ radius -- Use RADIUS protocol as accounting method.
mode
■ aaa accounting commands < stop-only >
Specify how to initiate and terminate an accounting session.
Supported Values:
■ stop-only -- Send stop record accounting notice.
Next Available Option:
■ method < radius > -- Specify which accounting method to use (radius) (p. 40)
■ aaa accounting exec < start-stop | stop-only >
Specify how to initiate and terminate an accounting session.
Supported Values:
■ start-stop -- Send start and stop record accounting notice.
■ stop-only -- Send stop record accounting notice only.
40© 2009 Hewlett-Packard Development Company, L.P.
aaaCommand Line Interface Reference Guide