EasyManua.ls Logo

HP ProCurve 5400zl

HP ProCurve 5400zl
765 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Supported Values:
Binary formatted value from 000000 to 111111
Next Available Options:
integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal. (p. 423)
binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY) (p. 416)
well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
Codepoint) value and an 802(p. 434)
qos < udp-port | tcp-port > ipv4 range TCP/UDP-PORT TCP/UDP-PORT dscp
Specify DSCP policy to use.
Supported Values:
Binary formatted value from 000000 to 111111
Next Available Options:
integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal. (p. 423)
binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY) (p. 416)
well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
Codepoint) value and an 802(p. 434)
qos < udp-port | tcp-port > ipv6 TCP/UDP-PORT dscp
Specify DSCP policy to use.
Supported Values:
Binary formatted value from 000000 to 111111
Next Available Options:
integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal. (p. 423)
binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY) (p. 416)
well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
Codepoint) value and an 802(p. 434)
qos < udp-port | tcp-port > ipv6 range TCP/UDP-PORT TCP/UDP-PORT dscp
Specify DSCP policy to use.
Supported Values:
Binary formatted value from 000000 to 111111
Next Available Options:
integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal. (p. 423)
binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY) (p. 416)
well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
Codepoint) value and an 802(p. 434)
qos < udp-port | tcp-port > ip-all TCP/UDP-PORT dscp
Specify DSCP policy to use.
Supported Values:
Binary formatted value from 000000 to 111111
420© 2009 Hewlett-Packard Development Company, L.P.
qosCommand Line Interface Reference Guide

Table of Contents

Other manuals for HP ProCurve 5400zl

Related product manuals