HP ProCurve 5400zl

configuration
■ show instrumentation monitor configuration
Usage: show instrumentation monitor conguration
Description: show congured thresholds for monitored parameters.
shows the parameter name and the congured threshold
value for all parameters.
If instrumenation monitoring for the particular paramter
is disabled then threshold for the particular parameter is
displayed as 'Not Monitored'.
connection-rate-filter
■ show connection-rate-filter
Usage: show connection-rate-lter [all-hosts] [blocked-hosts] [throttled-hosts]
Description: List the ports and the on/off connection-rate-lter status and
sensitivity.
Parameters:
o all-hosts - Display the IP addresses of the hosts that are blocked
and throttled
o blocked-hosts - Print the IP addresses of the hosts that are currently
blocked
o throttled-hosts - Print the IP addresses of the hosts that are currently
throttled
Next Available Options:
■ all-hosts -- Show blocked and throttled IP addresses.(p. 529)
■ blocked-hosts -- Show blocked IP addresses.(p. 534)
■ throttled-hosts -- Show throttled IP addresses.(p. 599)
console
■ show console
Usage: show console
Description: Show serial link/console settings.
counters
■ show ipv6 mld vlan VLAN-ID counters
Show MLD VLAN counter information.
cpu
■ show cpu
Usage: show cpu [<1-300>]
[slot <SLOT-LIST> [<1-90>] ]
Description: Show average CPU utilization over the last 1, 5, and 60 seconds;
or the number of seconds specied.
543© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide