â– show tech custom
Usage: show tech [all|custom|buffers|instrumentation|mesh|route|statistics
|transceivers|vrrp]
Description: Display output of a predeîš¿ned command sequence used by
technical support.
custom-port-list
â– show interfaces custom [ETHERNET] PORT-LIST
Usage: show interfaces [ethernet] PORT-LIST
Description: Show summary of network trafîš¿c handled by the ports.
Next Available Option:
â– column-list -- The list of desired FIELD[:WIDTH] (port, type, status, speed, mode, mdi, flow,
name, vlan, enabled, intrusion, bcast) (TITLE[:NN]) (p. 539)
debug
â– show debug
Usage: show debug
Description: Display currently active debug log destinations and types.
Parameters:
o buffer - Show the contents of the in-memory debug buffer
Next Available Option:
â– buffer -- Show the contents of the debug log buffer(p. 535)
debug-counters
â– show spanning-tree debug-counters
Show spanning tree debug counters information.
Next Available Options:
â– instance < 0 to 16 > -- Show spanning tree instance debug counters information. (NUMBER)
(p. 557)
â– ports -- Show spanning tree port(s) debug counters information. ([ethernet] PORT-LIST) (p.
580)
delayed-flush
â– show igmp delayed-flush
Usage: show igmp delayed-ush
Description: Shows switch-wide IGMP delayed ush value.
545© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide
To Next Page
Loading...
Need help?
General