HP ProCurve 5400zl

Description: Show names assigned to the ports. If the PORT-LIST is not
specied the default is to list all of the ports.
■ show port-security [ETHERNET] PORT-LIST
Usage: show port-security [intrusion-log|[ethernet] PORT-LIST]
Description: Show a table describing port security settings.
o intrusion-log - Show the intrusion log records.
o PORT-LIST - Show detailed information on particular ports in the
PORT-LIST specied.
■ show power-over-ethernet [ETHERNET] PORT-LIST
Usage: show power-over-ethernet [ethernet] PORT-LIST
Description: Show the ports' poe status.
■ show power-over-ethernet brief [ETHERNET] PORT-LIST
Usage: show power-over-ethernet [ethernet] PORT-LIST
Description: Show the ports' poe status.
■ show bandwidth output [ETHERNET] PORT-LIST
Specify ports for which information will be shown.
■ show rate-limit icmp [ETHERNET] PORT-LIST
Specify ports for which information will be shown.
■ show rate-limit all [ETHERNET] PORT-LIST
Specify ports for which information will be shown.
■ show rate-limit bcast [ETHERNET] PORT-LIST
Specify ports for which information will be shown.
■ show rate-limit mcast [ETHERNET] PORT-LIST
Specify ports for which information will be shown.
■ show sflow < 1 to 3 > sampling-polling [ETHERNET] PORT-LIST
Displays information about sampling and polling.
■ show spanning-tree [ETHERNET] PORT-LIST
Limit the port information printed to the set of the specied ports.
Next Available Options:
■ config -- Show spanning tree configuration information.(p. 540)
■ detail -- Show spanning tree extended details Port, Bridge, Rx, and Tx report.(p. 546)
■ instance -- Show spanning tree instance status information.(p. 557)
■ show spanning-tree bpdu-protection [ETHERNET] PORT-LIST
579© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide