in
â– [no] vlan VLAN-ID service-policy SERVICE-POLICY in
Apply policy on inbound packets.
integer-range
â– vlan VLAN-ID qos dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
interface
â– [no] vlan VLAN-ID vrrp vrid < 1 to 255 > track interface
Usage: [no] vrrp vrid <VRID> track interface <LPORT-LIST>
Description: Enable/disable tracking of logical ports for VR.
Next Available Option:
â– lport-list -- Enable/disable tracking of specified logical ports for VR ([ethernet] PORT-LIST) (p.
733)
interval
â– vlan VLAN-ID ip igmp querier interval < 5 to 300 >
Sets the interval in seconds between IGMP queries
(default: 125)
Range: < 5 to 300 >
â– vlan VLAN-ID ip-recv-mac-address MAC-ADDR interval
Specify the L3-Mac-Address timeout interval.
Next Available Option:
â– timer-interval < 1 to 255 > -- Timeout interval in seconds <1-255>. (p. 748)
ip
â– vlan VLAN-ID ip
Usage: [no] ip ...
Description: Conîš¿gure various IP parameters for the VLAN. The 'ip'
command must be followed by a feature-speciîš¿c keyword.
Use 'ip ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
728© 2009 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide
To Next Page
Loading...
Need help?
General