lan-prune-delay
â– [no] vlan VLAN-ID ip pim-dense lan-prune-delay
Usage: [no] ip pim-dense lan-prune-delay
Description: Turn on/off the LAN Prune Delay Option on this interface.
Default is 'on'.
â– [no] vlan VLAN-ID ip pim-sparse lan-prune-delay
Usage: [no] ip pim-sparse lan-prune-delay
Description: Turn on/off the LAN Prune Delay Option on this interface.
Default is 'on'.
link-local
â– [no] vlan VLAN-ID ipv6 address IPV6-ADDR link-local
Conîš¿gure a link-local IPv6 address.
local-proxy-arp
â– [no] vlan VLAN-ID ip local-proxy-arp
Usage: [no] ip local-proxy-arp
Description: Enable/disable local proxy ARP. This is a VLAN context command.
It can be called directly from the VLAN context or may follow
the 'vlan VLAN-ID' command preîš¿x. When local proxy ARP is
enabled on a VLAN, the device responds to all ARP requests
received on the VLAN ports with it's own hardware address.
lowest
â– vlan VLAN-ID vrrp vrid < 1 to 255 > primary-ip-address lowest
Dynamically determine lowest IP address.
lport-list
â– [no] vlan VLAN-ID vrrp vrid < 1 to 255 > track interface [ETHERNET] PORT-LIST
Usage: [no] vrrp vrid <VRID> track interface <LPORT-LIST>
Description: Enable/disable tracking of speciîš¿ed logical ports for VR.
mac-address
â– vlan VLAN-ID ip-recv-mac-address MAC-ADDR
The L3-mac-address to be associated with a VLAN.
Next Available Option:
â– interval -- Specify the L3-Mac-Address timeout interval. (p. 728)
maxadvertinterval
â– vlan VLAN-ID ip irdp maxadvertinterval < 4 to 1800 >
733© 2009 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide
To Next Page
Loading...
Need help?
General