Usage: [no] ip irdp maxadvertinterval <4-1800>
Description: Set the maximum time (in seconds) allowed between sending
unsolicited router advertisements.
Range: < 4 to 1800 >
max-graft-retries
â– vlan VLAN-ID ip pim-dense max-graft-retries < 1 to 10 >
Usage: ip pim-dense max-graft-retries <1-10>
Description: Set the maximum number of times this router will resend a
Graft on this interface. Default is 2.
Range: < 1 to 10 >
md5-auth-key-chain
â– vlan VLAN-ID ip ospf md5-auth-key-chain
Set MD5 authentication method and key chain.
Next Available Option:
â– chain-name -- Specify key chain to use for MD5 authentication. (ASCII-STR) (p. 720)
â– vlan VLAN-ID ip ospf IP-ADDR md5-auth-key-chain
Set MD5 authentication method and key chain.
Next Available Option:
â– chain-name -- Specify key chain to use for MD5 authentication. (ASCII-STR) (p. 720)
â– vlan VLAN-ID ip ospf all md5-auth-key-chain
Set MD5 authentication method and key chain.
Next Available Option:
â– chain-name -- Specify key chain to use for MD5 authentication. (ASCII-STR) (p. 720)
metric
â– vlan VLAN-ID ip rip metric < 1 to 15 >
Set metric for this interface.
Range: < 1 to 15 >
â– vlan VLAN-ID ip rip IP-ADDR metric < 1 to 15 >
Set metric for this interface.
Range: < 1 to 15 >
â– vlan VLAN-ID ip rip all metric < 1 to 15 >
Set metric for this interface.
Range: < 1 to 15 >
734© 2009 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide
To Next Page
Loading...
Need help?
General