EasyManuals Logo

HP ProCurve 5400zl User Manual

HP ProCurve 5400zl
765 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #738 background imageLoading...
Page #738 background image
â–  forward -- Instruct the device to forward incoming multicast packets received on the specified
ports ([ethernet] PORT-LIST) (p. 724)
â–  fastleave -- Enables MLD fast-leaves on the specified ports in the selected VLAN ([ethernet]
PORT-LIST) (p. 723)
â–  forcedfastleave -- Enables MLD Forced Fast-Leave on the specified ports in the selected VLAN,
even if they are cascaded ([ethernet] PORT-LIST) (p. 724)
monitor
â–  [no] vlan VLAN-ID monitor
Usage: 1) [no] monitor all <in|out|both> mirror <1-4 | NAME-STR>
[1-4 | NAME-STR]...
2) [no] monitor ip access-group <ACL-NAME> <in> mirror
<1-4 | NAME-STR> [1-4 | NAME-STR]...
Description: Dene either the VLAN is to be monitored or not.
The network trafc seen by the monitored VLAN is copied to
the Mirroring Destination to which a network analyzer can be
attached.
Note: When mirroring a VLAN in a busy network,
some frames may not be copied to the mirroring port.
This is an VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID command.
Parameters: o 1-4 - Mirror destination number
o NAME-STR - Friendly name associated with the mirror
destination number.
o ACL-NAME - Standard or Extended Access Control List number.
o <in|out|both> direction of the trafc to be monitored.
Next Available Option:
â–  all < In | Out | Both > -- Monitor all traffic.(p. 715)
monitor_mirror_session_id
â–  [no] vlan VLAN-ID monitor all < In | Out | Both > mirror < 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
mroute
â–  vlan VLAN-ID ip mroute
Usage: ip mroute ...
Description: Congure IP Multicast Routing parameters on the VLAN
interface. The command must be followed by a parameter.
Use 'ip mroute ?' to get a list of all possible parameters.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
Next Available Option:
â–  ttl-threshold < 0 to 255 > -- Set the multicast datagram TTL threshold for the interface(p. 749)
736© 2009 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide

Table of Contents

Other manuals for HP ProCurve 5400zl

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProCurve 5400zl and is the answer not in the manual?

HP ProCurve 5400zl Specifications

General IconGeneral
BrandHP
ModelProCurve 5400zl
CategorySwitch
LanguageEnglish

Related product manuals