EasyManuals Logo

HP ProCurve 5400zl User Manual

HP ProCurve 5400zl
765 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #747 background imageLoading...
Page #747 background image
enabled, the device cannot become Querier for the subnet
unless the VLAN has an IP Address (use the 'show ip' command
to determine this). Each subnet must have at least one IGMP
Querier-capable device in order for IGMP to function
properly. The querier interval setting modies the time (in
seconds) between IGMP queries.
Next Available Option:
â–  interval < 5 to 300 > -- Sets the interval in seconds between IGMP queries (default: 125) (p. 728)
â–  [no] vlan VLAN-ID ipv6 mld querier
Usage: [no] vlan < vid > ipv6 mld querier
Description: This command disables or re-enables the ability for the switch
to become querier if necessary. The no version of the command
disables the querier function on the switch.
The show ipv6 mld cong command displays the current querier
command. (Default Querier Capability: Enabled.)
rapid-commit
â–  [no] vlan VLAN-ID ipv6 address dhcp full rapid-commit
Obtain IPv6 address quickly from DHCPv6 server.
reachable-time
â–  [no] vlan VLAN-ID ipv6 nd reachable-time
Usage: [no] ipv6 nd reachable-time <milliseconds>
Description: Congures the length of time neighbors are considered
reachable after being conrmed as reachable via the
neighbor unreachability detection algorithm. This value
appears in router advertisements sent on this interface and
is also used to manage the neighbor table entries on this node.
Next Available Option:
â–  number < 1000 to 3600000 > -- Configures the router lifetime sent in router advertisements(p.
738)
receive
â–  vlan VLAN-ID ip rip receive < V1-only | V2-only | V1-or-V2 | ... >
Dene RIP version for incoming packets.
Supported Values:
â–  V1-only -- Accept RIP version 1 updates only.
â–  V2-only -- Accept RIP version 2 updates only.
â–  V1-or-V2 -- Accept both RIP 1 and RIP 2 updates.
â–  disabled -- Do not accept RIP updates.
â–  vlan VLAN-ID ip rip IP-ADDR receive < V1-only | V2-only | V1-or-V2 | ... >
Dene RIP version for incoming packets.
745© 2009 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide

Table of Contents

Other manuals for HP ProCurve 5400zl

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProCurve 5400zl and is the answer not in the manual?

HP ProCurve 5400zl Specifications

General IconGeneral
BrandHP
ModelProCurve 5400zl
CategorySwitch
LanguageEnglish

Related product manuals