What to do if connecting to devices that have a fixed full-duplex configuration with my HP ProCurve 5400zl Switch?
Ensure that all devices connected to the 5400zl switches are configured to auto negotiate, or are configured to connect at half duplex.
General| Model | 5400zl |
|---|---|
| Product Series | ProCurve |
| Layer | Layer 3 |
| VLAN Support | Yes |
| Jumbo Frame Support | Yes |
| Quality of Service (QoS) | Yes |
| Product Type | Switch |
| Management | Web, CLI, SNMP |
| Power over Ethernet (PoE) | Yes |
| Stacking | Yes |
| Power Supply | Redundant |
| Layer 3 Routing | Yes |
| Security Features | ACLs, RADIUS, TACACS+ |
| Operating Temperature | 0°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Form Factor | Modular chassis |
To Next Page
