HP XP P9500 - Page 180

Table 50 How to Prepare the Configuration Files at Each Site (HyperSwap) (continued)
How to PrepareContentsFile Type
On the Secondary SiteOn the Primary Site
Not requiredDefine a path setPath set definition file
• An inter-control unit
logical path from the
primary storage system
to the local storage
system
• An inter-control unit
logical path from the
local storage system to
the primary storage
system
• An inter-disk controller
logical path from the
primary storage system
to the remote storage
system
• An inter-disk controller
logical path from the
local storage system to
the remote storage system
Define a path setNot required
• An inter-disk controller
logical path from the
remote storage system to
the primary storage
system
• An inter-disk controller
logical path from the
remote storage system to
the local storage system
Not requiredDefine a route listRoute list definition
file/Command device
definition file
• A route/command device
from the local storage
system to the remote
storage system
• A route/command device
from the primary storage
system to the remote
storage system
Define a route listNot required
• A route/command device
from the remote storage
system to the primary
storage system
• A route/command device
from the remote storage
system to the local
storage system
Transfer from the primary
site
Define a copy groupA Cnt Ac-S Z copy group
with the HyperSwap
attribute
Copy group definition file
Define a copy groupA Cnt Ac-J Z copy group
Define a copy groupA Cnt Ac-J Z copy group for
Delta Resync
180 Configuration Definitions