HP XP P9500 - Recovering; Operating Procedure During a Primary Storage System Failure (Volatile)

Recovering
To recover to normal operation:
1. Finish remote storage system maintenance.
2. On the primary host, execute the YKRESYNC command for Cnt Ac-J Z copy pairs between the
primary storage system and the remote storage system.
• YKQUERY
• YKRESYNC
• YKEWAIT GOTO(DUPLEX)
Operation is returned to normal.
Operating Procedure During a Primary Storage System Failure (Volatile)
The following are the operating procedures performed when the primary storage system is in a
volatile failure state.
362 Maintenance and Troubleshooting Operations