HP XP P9500 - Operating Procedure During a Remote Site Storage System Failure (Nonvolatile); Preparing

6. From the primary site, execute the YKRESYNC SELECT(COND) command for the Continuous
Access Journal Z EXCTG.
• YKQUERY
• YKRESYNC SELECT(COND)
• YKEWAIT GOTO(DUPLEX)
Operation is returned to normal.
Operating Procedure During a Remote Site Storage System Failure (Nonvolatile)
The following explains the procedure to be performed when the remote site storage system is in a
nonvolatile failure state.
Preparing
No action is required.
Using a 4x4x4 Cascade Configuration 419