7. From the primary site, execute the YKRESYNC DELTAJNL command for the delta resync pair.
• YKQUERY
• YKRESYNC DELTAJNL
• YKEWAIT GOTO(DUPLEX)
If the command is successful, the status of the Cnt Ac-J Z copy pair on the local site and remote
site automatically changes to the HOLD status (delta resync pair).
Operation is returned to normal.
NOTE: If during operation the status of a delta resync pair changes to HOLDTRNS, NODELTA,
or HOLDER, see “Actions to be Taken When the Delta Resync Function Cannot be Set Up or
Operated Successfully” (page 340).
Performing Local Site Storage System Maintenance
This subsection explains the procedures for performing local site storage system maintenance.
Using a Delta Resync Configuration 305
To Next Page
Loading...
