8. Use Remote Web Console to reconfigure the delta resync control paths required between the
Primary > Local, Primary > Remote, and Local > Remote sites.
Operation is returned to normal.
Operating Procedure During a Remote Site Storage System Failure (Nonvolatile)
This subsection explains the procedure to perform when a remote site storage system is in a
nonvolatile failure state.
Preparing
No action is required.
Recovering
The recovery procedure to be performed when the remote site storage system is in a nonvolatile
state is the same as the recovery procedure performed during maintenance of the remote site
storage system. See “Recovering” (page 309) in “Performing Remote Site Storage System
Maintenance” (page 307).
Primary Site Host Failure
This subsection explains the procedure to perform when the host at the primary site fails.
Failover
To perform failover:
Using a Delta Resync Configuration 333
To Next Page
Loading...
