7. From the primary site, execute the YKRESYNC SELECT(COND) command for the Continuous
Access Journal Z EXCTG.
• YKQUERY
• YKRESYNC SELECT(COND)
• YKEWAIT GOTO(DUPLEX) NOINVALIDCHECK
Operation is returned to normal.
Operating Procedure During an Intermediate Site Storage System Failure (Nonvolatile)
The preparation and recovery procedures to be performed when a nonvolatile failure occurs in
the intermediate site storage system are the same as the procedures to be performed when a path
failure occurs between the primary site storage system and the intermediate site storage system.
See “Operating Procedure During a Path Failure between the Primary Site Storage System and the
Intermediate Site Storage System” (page 424).
Using a 4x4x4 Cascade Configuration 415
To Next Page
Loading...
