HP XP P9500 - Using a 4 X4 X4 Cascade Configuration

2. On the primary host, execute the YKRESYNC command for Cnt Ac-J Z copy pairs between the
primary storage system and the remote storage system.
• YKQUERY
• YKRESYNC
• YKEWAIT GOTO(DUPLEX)
Operation is returned to normal.
Using a 4x4x4 Cascade Configuration
The following table describes the maintenance and troubleshooting operations for a 4x4x4 Cascade
configuration.
Using a 4x4x4 Cascade Configuration 383