HP XP P9500 - Adding the Copy Pair to the Copy Group (CA); Defining the Copy Group ID and Copy Group Attributes (Cnt Ac-A)

7. Specify copy group attributes.
8. Press the Enter key.
The Copy Group Pair Detail panel appears.
Adding the copy pair to the copy group (CA)
The operations for adding a copy pair to a CA copy group are the same as those in “Adding the
copy pair to the copy group (Cnt Ac-J Z)” (page 480)
Defining the copy group ID and copy group attributes (Cnt Ac-A)
To define a Cnt Ac-A copy group:
1. Display the Discover/Define Configuration panel and choose 4 Copy Group Definitions.
The Copy Group Selection List panel displays.
2. Press the F5=Add key to add a Cnt Ac-A copy group.
The Add Copy Group panel displays.
3. Specify the Copy Group ID, Device Address Domain (for both Primary and Secondary), and
Copy Group Type (CAA).
4. Press the Enter key.
The Setting C/T ID Attributes panel displays.
5. Specify C/T ID (JNLG).
484 Using the ISPF panels