HP XP P9500 - Operating Procedure During a Path Failure between the Primary Site Storage System and the Intermediate Site Storage System

6. Execute the YKEWAIT GOTO(SUSPEND) command, and wait until the status of the Continuous
Access Journal Z copy pair has changed to SUSPOP.
7. From the primary site, execute the YKRESYNC command for the Continuous Access Journal Z
EXCTG.
• YKQUERY
• YKRESYNC
• YKEWAIT GOTO(DUPLEX)
Operation is returned to normal.
Operating Procedure During a Path Failure between the Primary Site Storage System
and the Intermediate Site Storage System
The following explains the procedures to be performed when a path failure occurs between the
primary site storage system and the intermediate site storage system.
424 Maintenance and Troubleshooting Operations