16. Specify s in the AC column for CU number 00.
You are returned to the Edit Logical Path Definition panel. The values are now displayed in
the S/N, Model, IFType, CU, SSID, and CCA columns of this panel.
Allocating physical paths to logical paths
If you obtain the port number information from a storage system and apply the port number that
comprises the current logical path to the path set definition file, you do not need to allocate a
physical path to that logical path. To obtain the port number information from a storage system,
see “Acquiring path information from a storage system” (page 113), and make sure that the conditions
are met.
To allocate physical paths to logical paths:
452 Using the ISPF panels
To Next Page
Loading...
