HP XP P9500 - Defining the Copy Group ID and Copy Group Attributes

Figure 120 Example of defining a copy group container
Defining the copy group ID and copy group attributes
To define the copy group ID and copy group attributes:
1. Display the Discover/Define Configuration panel and choose 4 Copy Group Definitions.
The Copy Group Selection List panel appears.
2. Press the F5=Add key (to add a Cnt Ac-J Z copy group).
The Add Copy Group panel appears.
3. Specify the Copy Group ID, Primary Device Addr. Domain, Secondary Device Addr. Domain,
Copy Group Type, and specify / for Use Container.
486 Using the ISPF panels