HP XP P9500 - Operating Procedure During a Local Site Storage System Failure (Volatile)

To Next Page

To Previous Page

10. From the primary site, execute the YKRESYNC DELTAJNL command for the delta resync pair.

• YKQUERY

• YKRESYNC DELTAJNL

• YKEWAIT GOTO(DUPLEX)

If the command is successful, the Continuous Access Journal Z copy pair on the local site and

the remote site is automatically moved to the HOLD status (delta resync pair).

Operation is returned to normal.

NOTE: If during operation the status of a delta resync pair changes to HOLDTRNS, NODELTA,

or HOLDER, see “Actions to be Taken When the Delta Resync Function Cannot be Set Up or

Operated Successfully” (page 340).

Operating Procedure During a Local Site Storage System Failure (Volatile)

This subsection explains the procedures to perform when the local site storage system is in a volatile

failure state.

326 Maintenance and Troubleshooting Operations

Other manuals for HP XP P9500