• YKQUERY
• YKRESYNC REVERSE
• YKEWAIT GOTO(DUPLEX)
If the command is successful, the delta resync pair between the primary and remote sites first
changes to the HOLDTRNS status, then the HOLD status. Continue monitoring until the status
changes to HOLD.
• YKEWAIT GOTO(HOLD)
4. From the primary site, execute the YKSUSPND FLUSH command for the Continuous Access
Journal for Mainframe copy pair between the local site and the remote site.
• YKQUERY
• YKSUSPND FLUSH
• YKEWAIT GOTO(SUSPEND)
5. From the primary site, execute the YKSUSPND FORWARD command for the Cnt Ac-S Z copy
pair.
Using a Delta Resync Configuration 303
To Next Page
Loading...
