6. Use Remote Web Console to set a journal group for the primary storage system.
7. From the local site, execute the YKMAKE HOLD command to create a delta resync pair for
Primary > Remote.
• YKQUERY
• YKMAKE HOLD
• YKEWAIT GOTO(HOLD)
8. Use Remote Web Console to reconfigure the delta resync control paths required between the
Primary > Local and Primary > Remote sites.
9. Stop operation on the local site.
10. From the primary site, execute the YKSUSPND FLUSH command for the Continuous Access
Journal Z copy pair between the local site and the remote site.
318 Maintenance and Troubleshooting Operations
To Next Page
Loading...
