• YKQUERY
• YKSUSPND FORWARD
• YKEWAIT GOTO(SUSPEND)
4. Start operations at the primary site.
5. On the primary host, execute the YKRESYNC FORWARD command for Cnt Ac-J Z copy pairs
between the primary storage system and the remote storage system.
• YKQUERY
• YKRESYNC FORWARD
• YKEWAIT GOTO(DUPLEX)
If the command is successful, the copy direction of Cnt Ac-J Z copy pairs is returned to the
original direction.
6. Restart the monitoring of HyperSwaps by using Business Continuity Manager.
For details, see “Operation Startup Procedure” (page 350).
Using a 2DC configuration with HyperSwap and Continuous Access Journal Z 359
To Next Page
Loading...
