• YKMAKE HOLD
• YKEWAIT GOTO(HOLD)
9. Use Remote Web Console to set a Delta Resync control path required for each copy pair.
10. Restart the monitoring of HyperSwaps by using Business Continuity Manager.
For details, “Operation Startup Procedure” (page 350).
11. Use TPC-R on the primary host to execute HyperSwaps.
The copy direction of Cnt Ac-S copy pairs with the HyperSwap attribute is reversed, and the
groups are moved from the DUPLEX status to the SWAPPING status.
12. Detect HyperSwaps of the Cnt Ac-S copy pairs with the HyperSwap attribute, and check the
status of each copy group.
13. On the primary host, execute the YKSUSPND FLUSH command for Cnt Ac-J Z copy pairs
between the local storage system and the remote storage system.
366 Maintenance and Troubleshooting Operations
To Next Page
Loading...
