HPE Cloudline CL3100 Gen10 - Page 116

Software and configuration utilities 116
Network Stack Configuration screen
The Network Stack Configuration screen allows the user to configure the Network Stack feature. If user
wants to boot to UEFI PXE, “Network Stack” should be “Enabled”. To access this screen from the Main
screen, choose Advanced > Network Stack Configuration.
Setup Item
Options
Help Text
Comments
Network Stack
Disabled
Enabled
Enable/Disable UEFI Network
Stack.
Ipv4 PXE Support
Disabled
Enabled
Enable Ipv4 PXE Boot Support.
If disabled IPV4 PXE boot option
will not be created.
Displays when Network Stack is
set to Enabled.
Ipv6 PXE Support
Disabled
Enabled
Enable Ipv6 PXE Boot Support.
If disabled IPV6 PXE boot option
will not be created.
Displays when Network Stack is
set to Enabled.
PXE Boot Wait Time
0
Wait time to press ESC key to
abort the PXE boot.
Displays when Network Stack is
set to Enabled.
Media Detect Time
1
Number of times presence of
media will be checked.
Displays when Network Stack is
set to Enabled.