HPE Cloudline CL3100 Gen10 - Page 119

Software and configuration utilities 119
Setup Item
Options
Help Text
Comments
BMC USB 2.0 Port B
Disabled
Enabled
Enable or disable this USB port.
When “XHCI Mode” is enabled,
this item will be hided.
NOTE: When XHCI Mode is enabled, BMC USB 2.0 Port A and BMC USB 2.0 Port B will be hidden,
and when disabled XHCI Mode, BMC USB 2.0 Port A and BMC USB 2.0 Port B will be displayed.
Power restore on AC Loss
The Power restore on AC Loss screen allows the user to configure the power state after AC power
failure. To access this screen from the Main screen, choose Advanced > Power restore on AC Loss.
Setup Item
Options
Help Text
Comments
BMC Status
Information only. Current power
state of BMC.
Power restore on AC
Loss
Power off
Last State
Power on
Unspecify
Select power state when power
is re-applied after a power
failure.