HPE Cloudline CL3100 Gen10

Software and configuration utilities 166
Key management screen
To access this screen from the Main screen, choose Security > Secure Boot > Key Management.
Setup Item
Options
Help Text
Comments
Provision Factory
Disabled
Enabled
Allows user to provision factory
default Secure Boot keys when
System is in Setup Mode
Install Factory Default
keys
Force System to Setup Mode -
clear all Secure Boot Variables
If “Provision Factory Defaults”
set to “Enabled”, factory default
Secure Boot keys will be loaded,
then if “Provision Factory
Defaults” set to “Disabled”,
“Install Factory Default keys”
option will turn to “Reset to
Setup Mode”.
Enroll Efi Image
Allow the image to run in Secure
Boot mode. Enroll SHA256 hash
of the binary into Authorized
Signature Database.
Save all Secure Boot
variables
Save NVRAM content of Secure
Boot policy variables to the files
(EFI_SIGNATURE_LIST data
format) in root folder on a target
file system device
If “Provision Factory Defaults”
set to “Enabled”, factory default
Secure Boot keys will be loaded
and then “Save all Secure Boot
variables” option will be
selectable.