To Next Page

To Previous Page

280

[RouterA-GigabitEthernet1/0/1] quit

[RouterA] interface gigabitethernet 1/0/2

[RouterA-GigabitEthernet1/0/2] ipv6 dhcp select server

[RouterA-GigabitEthernet1/0/2] quit

# Exclude the DNS server address from dynamic assignment.

[RouterA] ipv6 dhcp server forbidden-address 1::1:0:0:2

[RouterA] ipv6 dhcp server forbidden-address 1::2:0:0:2

# Create DHCPv6 address pool 1 to assign IPv6 addresses and other configuration parameters

to clients on subnet 1::1:0:0:0/96.

[RouterA] ipv6 dhcp pool 1

[RouterA-dhcp6-pool-1] network 1::1:0:0:0/96 preferred-lifetime 172800

valid-lifetime 345600

[RouterA-dhcp6-pool-1] domain-name aabbcc.com

[RouterA-dhcp6-pool-1] dns-server 1::1:0:0:2

[RouterA-dhcp6-pool-1] quit

# Create DHCPv6 address pool 2 to assign IPv6 addresses and other configuration parameters

to clients on subnet 1::2:0:0:0/96.

[RouterA] ipv6 dhcp pool 2

[RouterA-dhcp6-pool-2] network 1::2:0:0:0/96 preferred-lifetime 432000

valid-lifetime 864000

[RouterA-dhcp6-pool-2] domain-name aabbcc.com

[RouterA-dhcp6-pool-2] dns-server 1::2:0:0:2

[RouterA-dhcp6-pool-2] quit

Verifying the configuration

# Verify that clients on subnets 1::1:0:0:0/96 and 1::2:0:0:0/96 can obtain IPv6 addresses and all

other configuration parameters from the DHCPv6 server (Router A). (Details not shown.)

# On the DHCPv6 server, display IPv6 addresses assigned to the clients.

[RouterA] display ipv6 dhcp server ip-in-use

HPE FlexNetwork MSR Series Comware 7 Layer 3 - Ip Services Configuration Guides

Other manuals for HPE FlexNetwork MSR Series