HPE FlexNetwork MSR Series Command Reference

41
Field Description
NOTE:
If the client uses portal authentication, this field does not display the portal
username of the client.
AID Association ID.
AP ID ID of the AP that the client is associated with.
AP name Name of the AP that the client is associated with.
Radio ID ID of the radio that the client is associated with.
SSID SSID with which the client is associated.
VLAN ID ID of the VLAN to which the client belongs.
Power save mode
Power saving mode of the client:
• Active.
• Sleep.
Wireless mode
Wireless mode:
• 802.11a.
• 802.11b.
• 802.11g.
• 802.11gn.
• 802.11an.
• 802.11ac.
Channel bandwidth
Channel bandwidth:
• 20 MHz.
• 40 MHz.
• 80 MHz.
• 160 MHz.
SM Power Save
SM Power Save enables only one antenna of a client to operate in active
state, and others to operate in sleep state to save power.
• Enabled—SM Power Save is enabled.
• Disabled—SM Power Save is disabled.
SM power save mode
Power saving mode:
• Dynamic.
• Static.
Short GI for 20MHz
Whether the client supports short GI when its channel bandwidth is 20 MHz:
• Supported.
• Not supported.
Short GI for 40MHz
Whether the client supports short GI when its channel bandwidth is 40 MHz:
• Supported.
• Not supported.
Short GI for 80MHz
Whether the client supports short GI when its channel bandwidth is 80 MHz:
• Supported.
• Not supported.
Short GI for 160/80+80MHz
Whether the client supports short GI when its channel bandwidth is 160 MHz
or 80 + 80 MHz:
• Supported.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English